11-08-18, 08:37 AM
I have St60+ instruments and ST60 Multi as first instrument. I also have A95 plotter.
I need to meassure dept in meter, and speed in knots and wind in m/s.
After having updated instruments to latest sw, all instruments now shows dept in feet and temperature in F.. When trying to change on A95 I choose meter, but the instrument pop back to feet after some seconds. The same happens on ST60+. I therefore assumed that the ST60 was master and tried on that. However on the User Calibration - the screen with units is newer shown. Should be the screen afger time offset - "temperature" (Units). But that screen newer show.
How do I now get the units changed???
Best Regards,
Mads
S/Y Looma IV
I need to meassure dept in meter, and speed in knots and wind in m/s.
After having updated instruments to latest sw, all instruments now shows dept in feet and temperature in F.. When trying to change on A95 I choose meter, but the instrument pop back to feet after some seconds. The same happens on ST60+. I therefore assumed that the ST60 was master and tried on that. However on the User Calibration - the screen with units is newer shown. Should be the screen afger time offset - "temperature" (Units). But that screen newer show.
How do I now get the units changed???
Best Regards,
Mads
S/Y Looma IV