02-11-19, 02:12 PM
Hi Raymarine,
Please see attached my current marine network wiring for both SeaTalk 1 / SeaTalk NG /NMEA 2000 setup (page 1) as well as current NMEA0198 wiring (page 2).
I am looking at a refurbished eS98 from the Raymarine store. I would add this as a second display next to the existing eS127 MFD display. Here are my questions:
1) What is the simplest way to add the eS98 to this network?
2) Would the eS98 be able to interface with everything the eS127 could interface with?
3) Would the eS127 need to be powered on in order for the eS98 to see anything?
4) Given the existing display is a eSxx7 series and the other one would be an eSxx8 series - I believe that means one is DownVision and the other is CHIRP? Would there be a difference in how the eS127 vs the eS98 interface / display the sonar images from my existing transducer?
Thanks!
Please see attached my current marine network wiring for both SeaTalk 1 / SeaTalk NG /NMEA 2000 setup (page 1) as well as current NMEA0198 wiring (page 2).
I am looking at a refurbished eS98 from the Raymarine store. I would add this as a second display next to the existing eS127 MFD display. Here are my questions:
1) What is the simplest way to add the eS98 to this network?
2) Would the eS98 be able to interface with everything the eS127 could interface with?
3) Would the eS127 need to be powered on in order for the eS98 to see anything?
4) Given the existing display is a eSxx7 series and the other one would be an eSxx8 series - I believe that means one is DownVision and the other is CHIRP? Would there be a difference in how the eS127 vs the eS98 interface / display the sonar images from my existing transducer?
Thanks!