02-21-19, 06:35 PM
I have an 2005 ST8001 connected to two E120s though Sea-talk. I've been having issues with it and was wondering if a ST8002 would be ok as a replacement and if the ST8002 would work with the existing remote control?
02-21-19, 06:35 PM
02-21-19, 10:16 PM
Hello Eirinnrose,
Yes, certainly you can replace an ST8001 with ST8002. That will have no impact on the way the system operates.
Alternatively, the modern p70RS will also work. Connect via a D244 3-way Seatalk1 junction block and A06073 ST1-STNG adaptor cable. The p70/p70S/p70R/p70RS can talk to older pilots through either Seatalk1 or SeatalkNG (NMEA2000), which is why a simple adaptor cable will work in this instance. Don't use one of our Seatalk1-SeatalkNG convertors in this case (these are required if you need to translate between the two languages, but as I say, the p70RS can talk either language directly.)
Regards,
Tom
Yes, certainly you can replace an ST8001 with ST8002. That will have no impact on the way the system operates.
Alternatively, the modern p70RS will also work. Connect via a D244 3-way Seatalk1 junction block and A06073 ST1-STNG adaptor cable. The p70/p70S/p70R/p70RS can talk to older pilots through either Seatalk1 or SeatalkNG (NMEA2000), which is why a simple adaptor cable will work in this instance. Don't use one of our Seatalk1-SeatalkNG convertors in this case (these are required if you need to translate between the two languages, but as I say, the p70RS can talk either language directly.)
Regards,
Tom
02-23-19, 10:50 PM
Thanks Tom, Much appreciated. My ST8001 jumps several degrees with just turned a degree or two. Looking for something so I can pull mine and still have an auto pilot.