Raymarine forum

Raymarine forum > Raymarine Forums > Autopilots > [CA11] how to convert s3g autoplot to sea talkng
Full Version: [CA11] how to convert s3g autoplot to sea talkng
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

kimberlite

04-03-19, 11:17 AM
My S3G supplies power and data to most of my st60+ instruments and autopilot heads.st 6001 and st 7001.
How do I interface this to sea talk NG and my e120 and e80 chart plotters?
Thanks

Chuck - Raymarine - Moderator

04-03-19, 01:06 PM
Welcome to the Raymarine Forum kimberlite,

Please click here to view a FAQ addressing this subject. The process should begin with ensuring that the MFD's have been updated with v5.69 E-Series Classic MFD software and if not that the software within the MFDs be updated accordingly. Raymarine offers the A06061 / 4.92in (1.5m) Adapter Cable to permit the Data Master MFD to be interfaced to a spur socket within the backbone via the MFD's SeaTalk2/NMEA 2000 socket.
Raymarine forum > Raymarine Forums > Autopilots > [CA11] how to convert s3g autoplot to sea talkng
Reference URL's