04-06-19, 12:29 PM
I have the ST60 depth and speed gauges fitted - having just changed the depth gauge to show water line depths I decided to set a shallow alarm. I ensured that the lock shallow was OFF and having pressed ALARM that the shallow alarm was ON (pressed reset for 1 second). The shallow alarm depth is far to great for me so I need to change it - I read the manual (really) and then tried to press OFSSET and RESET together to get into adjustment mode but no joy - sometimes I get the W/L OFFSET displayed but most of the time nothing. Neither the offset nor reset have any effect. Am I on the right track or doing something wrong here??