04-08-19, 03:58 PM
04-09-19, 01:42 PM
Welcome to the Raymarine Forum FISHFEARME,
Should Raymarine's A80318 TM275 LH-W transducer be interfaced to the Axiom Pro RVX MFD, then the Fishfinder application may be configured to plot low frequency CHIRP, high frequency CHIRP, or both simultaneously.
Should Raymarine's A80318 TM275 LH-W transducer be interfaced to the Axiom Pro RVX MFD, then the Fishfinder application may be configured to plot low frequency CHIRP, high frequency CHIRP, or both simultaneously.
05-23-19, 06:56 PM
Are any adapter cables needed?
05-24-19, 08:49 AM
FISHFEARME,
The plug of Raymarine's A80318 TM275 LH-W transducer may be plugged directly into the 1kW Transducer socket of any of the following:
- Axiom Pro RVX MFD
- RVX1000
- CP470
- CP570
The plug of Raymarine's A80318 TM275 LH-W transducer may be plugged directly into the 1kW Transducer socket of any of the following:
- Axiom Pro RVX MFD
- RVX1000
- CP470
- CP570
06-07-19, 06:20 PM
A80327 will this cable fit the 1k port on the axiom rvx? And also plug into the a80318?
06-11-19, 08:49 AM
Yes, the A80327 Transducer Ext. Cable, CP470/570, 10M may be used to extend the A80318 TM275 LH-W transducer's cable. The extension cable features male and female plugs to permit the transducer's cable to be connected to one end of the extension able and the other end to be connected to the MFD's 1kW Transducer socket.