05-10-16, 08:02 AM
I have a seatalkng network with 2 - i70 and 1 - ST70+ displays.
In calibration mode, I can see the windspeed from the wind pod, but it doesn't show on the i70 or ST70+ screen in display mode (reads 0.0 kts). The wind direction also goes counterclockwise when I turn clockwise. Which display should I run setup/calibration from if it matters. The depth and speed don't show either. All 3 pods are found by the network.
In calibration mode, I can see the windspeed from the wind pod, but it doesn't show on the i70 or ST70+ screen in display mode (reads 0.0 kts). The wind direction also goes counterclockwise when I turn clockwise. Which display should I run setup/calibration from if it matters. The depth and speed don't show either. All 3 pods are found by the network.