I recently updates to 3.9 and finaly everything worked fine.
I only dont know why the laylines are always empty. I already reset the device via androids factory reset. Didnt help so far.
Hopefully you can see in the picture what is wrong.
Speed trought water, wind and gps are fine!
Thanks
Breeze
Dear Breeze,
Have you selected the polar options for your vessel?
Have you got the laylines switched on?
Chart>Menu>setting>laylines>on
Then on the chart select a waypoint to go and the laylines should appear.
Many Thanks
Louise
Many thanks for you reply,
I selected polar settings and also fixed angles.
Laylines are turned on in the settings tab.
I already made some waypoints this weekend and sailed about 80 nm they didnt appear so far.
I dont have heading data like an compass onboard, is it still possible to get laylines ?
Thanks in advance, i looking forward for your message.
Breeze
Dear Breeze,
On the dashboard you are using the 'sailing wind angle' dial, this will not display the layline steering guidelines. You need to select either fixed and angles or polar and then change the dial to 'apparent wind dial' or 'true wind dial' in order to view the steering targets.
Many Thanks
Louise
Thanks for your reply,
All empty with one arrow at 0 degrees
Dear Breeze,
Can you explain what is empty and what is the arrow at zero degrees?
Can you send a screenshot of what you are seeing?
Many Thanks
Louise