Raymarine forum

Raymarine forum > Raymarine Forums > Multifunction Displays > [CA11] Lighthouse 3.9 - Waypoint Arrival Radius
Full Version: [CA11] Lighthouse 3.9 - Waypoint Arrival Radius
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

BobMack

05-28-19, 04:36 PM
Looking in manual for procedures for adjusting the Waypoint Arrival Radius.

I past software this allowed a route to maintain a reduced radius then implementing a turn during a route. I have not adjusted my new lighthouse 3.9 and some turns end up starting way too soon when working within narrow channels.

Chuck - Raymarine - Moderator

06-03-19, 04:15 PM
Welcome to the Raymarine Forum Bob,

Waypoint arrival has always been associated within an alarm within Raymarine systems. The waypoint arrival radius is configured within the LightHouse 3 Alarms settings (HOME->ALARMS->SETTINGS->ARRIVAL RADIUS).
Raymarine forum > Raymarine Forums > Multifunction Displays > [CA11] Lighthouse 3.9 - Waypoint Arrival Radius
Reference URL's