06-23-19, 10:35 AM
I have axiom 9, axiom 7 and a quantum 2 connected to a HS5 network switch. Had been working fine. Connected the mfd’s yesterday - went out and went to power up radar and got message no radar found - trying to connect. Checked the switch and all 3 green poet lights were in and flashing. After my cruise. Removed the displays from the helm. This morning, went down and connected the displays. Same result. So I decided to swap the network cables from the axiom 9 and 7. Powered system back up and radar works as before. The radar was originally setup with the axiom 9 directly. Does it make sense that a port change on the mfd matters on the HS5? Thats the only change. Radar is on port 5, axiom 9 on 4 and axiom 7 on 3. This works. When the 9 and 7 ports are seapoed it does not work. Anybideas?