07-03-19, 09:17 AM
Hello
I have a Charplotter A60 connected with a GPS antenna and to a smart pilot ST 6001 through NMEA 0183 input port
I have also the wind / Auto Pilot / Speed ( ST60) connected to the smart Pilot through the Seatalk Input Port.
I would want to get all the info from NMEA ( GPS / SOG/ Depth ) and Seatalk ( Speed / Wind / COG/..) network from the ST 6001 in order to multiplex them with an AIS system. ( NMEA 0813 inputs only)
I read that the NMEA OUPUT doesn't contain the DATA inputs but only a few sentences . Is it correct ?
Is it possible on the seatalk ( Port 2) to retrieve all info including the ones coming from NMEA 0183 ?
What do you sugges to get these data ?
Thanks a lot for your support
I have a Charplotter A60 connected with a GPS antenna and to a smart pilot ST 6001 through NMEA 0183 input port
I have also the wind / Auto Pilot / Speed ( ST60) connected to the smart Pilot through the Seatalk Input Port.
I would want to get all the info from NMEA ( GPS / SOG/ Depth ) and Seatalk ( Speed / Wind / COG/..) network from the ST 6001 in order to multiplex them with an AIS system. ( NMEA 0813 inputs only)
I read that the NMEA OUPUT doesn't contain the DATA inputs but only a few sentences . Is it correct ?
Is it possible on the seatalk ( Port 2) to retrieve all info including the ones coming from NMEA 0183 ?
What do you sugges to get these data ?
Thanks a lot for your support