07-17-19, 04:54 PM
Hello, I am having some trouble updating the software on a Quantum 2 radar connected to an Axiom Pro 9". Purchased and installed the system a year ago. Radar is connected with a network cable and operates. Also operates over Wifi when configured. After performing a software update all the devices successfully updated, (Axiom Pro 9 RVX, ACU150, EV-1) except the Quantum 2 which instantly reports "Failed to start", "Some Updates Failed.".
I have tried dozens of times with no luck. Using wifi connected to the radar, using the network connection, making sure the radar connects and operates before updating, used 3 different SD cards, using software from online, and performed a factory reset on the Axiom Pro.
Is there something else I need to do to update the software on a Quantum 2 radar?
Attached are pics of software update steps performed.
Thankyou for any assistance
I have tried dozens of times with no luck. Using wifi connected to the radar, using the network connection, making sure the radar connects and operates before updating, used 3 different SD cards, using software from online, and performed a factory reset on the Axiom Pro.
Is there something else I need to do to update the software on a Quantum 2 radar?
Attached are pics of software update steps performed.
Thankyou for any assistance