08-03-19, 04:25 AM
Hello,
On my boat I have a S2 smart pilot connected to a ST6001 and ST60 through seatalk bus. I use the "Adrena" software (https://www.adrena-software.com/) on a PC an want to connect it to the S2 module to control the navigation (waypoints defined on the PC). To do that, I will connect one NMEA entry of the S2 to the PC. From what I read in the documentation about the "extracted information" of the NMEA input, this should work. Can someone confirm that using the NMEA connction I will be able to control the track of the boat through my computer ?
Best regards.
Paul-Henri
On my boat I have a S2 smart pilot connected to a ST6001 and ST60 through seatalk bus. I use the "Adrena" software (https://www.adrena-software.com/) on a PC an want to connect it to the S2 module to control the navigation (waypoints defined on the PC). To do that, I will connect one NMEA entry of the S2 to the PC. From what I read in the documentation about the "extracted information" of the NMEA input, this should work. Can someone confirm that using the NMEA connction I will be able to control the track of the boat through my computer ?
Best regards.
Paul-Henri