08-14-19, 09:43 AM
I have a fully functional SeaTalkng backbone for a78/CPT100/CPT200 also connected to my N2k compatible Level 2 Mercmonitor (MM). Original setup advice given in 2015 on the old tech forum, which I followed to the letter, included the use of an inline terminator to connect to MM.
The one thing I was have never been able to obtain is GPS info to MM. My a78 also did not display the MM as a device on the network. Have always been suspicious of the inline terminator, and last weekend, it with a SeaTalkng "T".
Checking device list afterward, the MM now displays as a device on the network. I thought the issue was finally resolved but still no GPS data to MM.
MM info from a78 device list:
NMEA data base version: 1.3
Product code: 130
Model ID: Mercury Marine M3
Software version: 5.01
Model version: Gateway
Model serial code: 110415116 3
Can address: 0
Current MM GPS settings:
Gateway: N2k
Gateway: Transmit (correct setting Smartcraft capable engines which mine is)
GPS data: Yes
GPS Enabled: Yes
Use GPS speed: Yes
Why am I still not receiving GPS info on the network? Do I need to run the "engine id" procedure (don't care to have engine data displayed on MFD)?
The one thing I was have never been able to obtain is GPS info to MM. My a78 also did not display the MM as a device on the network. Have always been suspicious of the inline terminator, and last weekend, it with a SeaTalkng "T".
Checking device list afterward, the MM now displays as a device on the network. I thought the issue was finally resolved but still no GPS data to MM.
MM info from a78 device list:
NMEA data base version: 1.3
Product code: 130
Model ID: Mercury Marine M3
Software version: 5.01
Model version: Gateway
Model serial code: 110415116 3
Can address: 0
Current MM GPS settings:
Gateway: N2k
Gateway: Transmit (correct setting Smartcraft capable engines which mine is)
GPS data: Yes
GPS Enabled: Yes
Use GPS speed: Yes
Why am I still not receiving GPS info on the network? Do I need to run the "engine id" procedure (don't care to have engine data displayed on MFD)?