09-23-19, 08:45 PM
Hi I have an issue with my es128 mfd were the transducer on broken off. So I purchased cp100 module to connect the transducer to it then to the network. The problem is that I need to splice a new connector on the end of the transducer cable because one of the pins is broken off. I went to a raymarine authorized dealer and they sold me a cable extension. When I cut off the end they were more bundles of wires in the new cable end. The cpt120 cable only has 2 twisted pairs black red and two bare wires. The new end had 4 twisted paires black, red, white and two bare wires. which wires do I connect together to add the new end or did the guy sell me the wrong connector even though the pins at the end are the same. fits the socket.