Raymarine forum

Raymarine forum > Raymarine Forums > Instruments > [CA11] ST60 Wind Speed error
Full Version: [CA11] ST60 Wind Speed error
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Ginodelg

10-17-19, 04:36 PM
Hello,
I have an ST60 Wind instrument installed on my boat. For some reason the wind speed keeps jumping up to 99. I installed a new wind transducer at the top of the mast but the same thing is happening. However, when I look at the wind speed on the chart plotter, the speed seems to be accurate. Any ideas?

Chuck - Raymarine - Moderator

10-21-19, 10:50 AM
Welcome to the Raymarine Forum Ginodelg,

It is recommended that the ST60 Wind Instrument be reset to Factory Default calibration settings and that the transducer then be re-calibrated to address the reported symptom. Details for resetting Factory Default calibration settings may be found on page 33 of the ST60 Wind Instrument Owner's Manual.
Raymarine forum > Raymarine Forums > Instruments > [CA11] ST60 Wind Speed error
Reference URL's