11-21-19, 05:27 PM
My trawler has a pair of 100 US gallon diesel fuel tanks. The port tank has been emptied, inspection ports installed and the tank cleaned. I plan to install the Oceanic Systems submersible hydrostatic sensor (Part 4652) and tank level adaptor (Part 4291).
A Raymarine Axiom Pro MFD was installed several months ago. I plan to repeat the process on the starboard tank after completing sensor installation and refueling the port tank. I would prefer to add no more than 25 gallons of diesel fuel to the port tank because of trim concerns with an empty starboard tank.
Question:
Is it possible to have an accurate tank calibration with 25 gallons of fuel?
Thanks
A Raymarine Axiom Pro MFD was installed several months ago. I plan to repeat the process on the starboard tank after completing sensor installation and refueling the port tank. I would prefer to add no more than 25 gallons of diesel fuel to the port tank because of trim concerns with an empty starboard tank.
Question:
Is it possible to have an accurate tank calibration with 25 gallons of fuel?
Thanks