[CA] [CA11] HD Radar Connectors - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124) +--- Thread: [CA] [CA11] HD Radar Connectors (/showthread.php?tid=10080) |
[CA11] HD Radar Connectors - Undercutter - 12-09-19 02:12 AM I Have a Raymarine HD Digital Radar and I need to replace the connector for cable attachment to the radar as well as the connector to the high speed switch. Do you have part numbers? RE: [CA11] HD Radar Connectors - Chuck - Raymarine - Moderator - 12-09-19 05:45 PM Welcome to the Raymarine Forum Undercutter, Unfortunately, Raymarine does not offer replacement plugs for Digital Radar Cables. Should radome/pedestal end of the Digital Radar Cable have failed, then the Digital Radar Cable must be replaced. The RayNet Ethernet plug of a Digital Radar Cable, may be replaced by splicing the cable to any Raymarine RayNet Cable or RayNet Adapter featuring a RayNet (F) plug on one end. Similarly, RJ54 Ethernet plug of a Digital Radar Cable, may be replaced by installing new and commonly available shielded RJ45 plug onto the cable. |