+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [LW] [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter (/showthread.php?tid=10104)
[LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter - NS30Paul - 12-11-19 09:57 PM
Will the Raymarine E70010 ITC-5 Instrument Transducer Converter work for other manufacturer's analog wind instruments, specifically Data Marine Wind Machine?
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter - Louise - Raymarine - Moderator - 12-12-19 05:43 AM
Dear NS30paul,
The iTC-5 will only work with Raymarine transducers. Your third party wind transducer will not work with the iTC-5. Do you have the instrument still? Can you output the data over NMEA to share wind data on the network?
Many Thanks
Louise
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter - NS30Paul - 12-12-19 12:54 PM
I still have the Data Marine wind machine (Corinthian) and it is functional. I don’t believe it has digital output to directly feed into nmea. I would like to have wind speed and direction fed to my Axiom 9.
Is there a way or is thee a masthead unit that I can buy without the display module?
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter - Louise - Raymarine - Moderator - 12-19-19 03:45 AM
Dear NS30Paul,
RE: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter - Louise - Raymarine - Moderator - 12-19-19 04:55 AM
Dear NS30Paul,
Thank you for your response.
The iTC-5 will work with either one of our short or long arm wind vane without the requirement of an instrument display and the transducer directly connected to the iTC-5.
The part numbers are as follows;
Short arm vane transducer with 30m cable E22078
Long arm wind vane transducer with 50m cable E22079
Many Thanks
Louise