+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: LightHouse Charts (/forumdisplay.php?fid=118)
+--- Thread: [CA] [CA11] LightHouse NC2 North America (/showthread.php?tid=10132)
[CA11] LightHouse NC2 North America - Family Tides - 12-16-19 12:44 PM
I have LightHouse NC2 North America chart card Published: 04/18/2019. I am unable to hide fishing hot spots on the chart. Clicking on the 3 lines in the upper right, opens up a menu on the right side. If I click on SIMPLE or DETAILED or FISHING CHART it always shows the fishing hot spots. Is there another way to hide the fishing hot spots when I am not fishing?
I have attached a picture showing the menu I am using. I also have a video if it helps.
This is on a Axiom 9 RV E70367 with Software Version 3.11.42.
RE: [CA11] LightHouse NC2 North America - Chuck - Raymarine - Moderator - 12-17-19 03:05 PM
Welcome back to the Raymarine Forum Family Tides,
The icon which you have identified is referred to as a Marked Fishing Area (MFA). These objects were intended to be hidden or shown via the Marine Features Advanced Chart setting (SETTINGS->ADVANCED->MARINE FEATURES). However, upon determining which setting was responsible for hiding MFAs, it was determined that this setting is inadvertently hiding the island as well. A problem report will be logged to address this issue within a future LightHouse 3 software update.