+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [LW] [LW11] New SeaTalkng device on SeaTalk1 network (/showthread.php?tid=10392)
[LW11] New SeaTalkng device on SeaTalk1 network - Owntelemaque - 01-26-20 10:09 PM
Hi,
I used to have the ST60+ system installed on my boat:
- ST60+ with its Wind module and depth finder
- ST50 (multi-function display)
- ST4000+ (Auto pilot)
I got struck by lighting and needed to replace the wind module by a i60 that is now SeaTalkng
Now I have:
- ST60+ display with the depth finder
- Wind module i60 with sensor (SeaTalkng)
- ST50 (multi-function display)
- ST4000+
Please, see picture for details of the devices.
I understood easily how to connect the wind sensor on the i60 but can't figure out how to connect the i60 to the rest of the system.
Are they any cables I can buy to connect the SeaTalkng to the SeaTalk1 network? At the moment I can't even plug the power to the i60.
Can you help me please?
Thank you,
Nicolas
RE: [LW11] New SeaTalkng device on SeaTalk1 network - Louise - Raymarine - Moderator - 01-31-20 06:56 AM
Dear Nicolas,
You can buy an adaptor cable for this specific purpose, the ST1 (3 pin) to STng spur (female) available in 2 lengths.
A06047 is 400mm
A06073 is 1m
Many Thanks
Louise