[CA11] Axiom 9 RVX adapter to B744V Transducer - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124) +--- Thread: [CA11] Axiom 9 RVX adapter to B744V Transducer (/showthread.php?tid=10980) |
[CA11] Axiom 9 RVX adapter to B744V Transducer - Sea Tiger - 04-19-20 05:41 PM I have removed my Classic E80 MFD and associated navigation system and have added an Axiom Pro 9 RVX MFD, I have an existing Airmar B744V 50/200kHz-A PN: 31-313-2-01 Rev.09 Customer Part # E66056 that will stay in the hull this year. I am also installing the RV-100 Transducer on the transom. Please provide the correct Y-adapter cable or adapter needed for connection to the Axiom Pro and both transducers. I am aware that the transducer cable for the B744V no longer pairs to the DSM300 and it has been removed from the vessel. I just wanted give you all a big thank you, as I have removed almost all of my 2005 era electronics and replaced them with current equipment. The forum has been a big help and I will continue to use it as I am quickly becoming a Raymarine addict. I just need to finish up and get back on the water. I have installed the following: Axiom Pro 9 RVX MFD Quantum 2 Doppler Radar AR200 as my GPS and heading sensor (I do not have autopilot) ST80 (legacy equipment at rear helm) ST1 to STng Ray73 VHS/AIS Radio Shakespeare Galaxy VHS/AIS 8" Antenna Shakespeare Galaxy AM/FM 8' Antenna Thanks, Sea Tiger RE: [CA11] Axiom 9 RVX adapter to B744V Transducer - Chuck - Raymarine - Moderator - 04-20-20 05:24 PM Welcome back to the Raymarine Forum Sea Tiger, Transducers which had been designed to be directly (no adapter) to a DS30, DSM300, or DSM250 may be adapted (part #A80496) to be mated to the 1kW Transducer socket of Axiom Pro RVX MFDs. |