+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Sharing charts between C140W and E80/C90W (/showthread.php?tid=11034)
[CA11] Sharing charts between C140W and E80/C90W - Pan76 - 04-26-20 12:39 PM
Is it possible to share charts from a C140W to a E80? If so what is required to do it?
If I obtain a C90W and connect it to the C140W via STNG will charts then be shared?
RE: [CA11] Sharing charts between C140W and E80/C90W - Chuck - Raymarine - Moderator - 04-27-20 10:40 AM
Welcome back to the Raymarine Forum Pan76,
Q1. Is it possible to share charts from a C140W to a E80? If so what is required to do it?
A1. Negative. Please note that E-Series Classic MFDs have only been designed and tested to be interfaced via Ethernet communications to other E-Series Classic MFDs. Similarly, C-Series Widescreen MFDs have only been designed and tested to be interfaced via Ethernet communications to one other C-Series Classic MFDs. C-Series Widescreen MFDs have not been designed and tested to be interfaced via Ethernet communications to other models of MFDs.
Q2. If I obtain a C90W and connect it to the C140W via STNG will charts then be shared?
A2. No. The displays need to be connected on STHS to share the chart data.
RE: [CA11] Sharing charts between C140W and E80/C90W - Pan76 - 05-21-20 10:20 AM
I now have a C90W connected to a C140W via a powered and otherwise well working STNG-network.
The charts are not shared and I can’t figure out how to share them...
RE: [CA11] Sharing charts between C140W and E80/C90W - Chris - Raymarine - Moderator - 05-26-20 01:24 PM
Hello Pan76,
The widescreen displays need to be connected on STHS to share chart data.
The STNG does not pass chart data in between the displays.
I would recommend connecting the two displays with STHS cables and they will share the chart data.
An example of a cable would be the A62245. There are also many other STHS cables to facilitate connecting the displays. https://www.raymarine.com/view/index-id=5537.html
Chris,
RE: [CA11] Sharing charts between C140W and E80/C90W - Pan76 - 05-26-20 03:01 PM
A bit confusing as the first reply stated that it would be shared via STNG..
I have a STHS cable running from the C140W to a radarantenna with a joint close to the C90W. Would it be possible to put a RJ45-splitter there and connect the C90W to that and then get the chart shared?
RE: [CA11] Sharing charts between C140W and E80/C90W - Chris - Raymarine - Moderator - 05-26-20 03:24 PM
Hi Pan76,
Thank you for informing of that error. I have corrected it in the previous post.
If you are refering to adding a HS5 switch to connect the displays and the Radar, yes that will work.
Chris,