+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: CAM200 IP loses picture (/showthread.php?tid=11395)
CAM200 IP loses picture - ocgrant - 05-23-20 06:02 PM
I have a CAM200 and a CAM220 both powered from the same source and the CAM200 (engine room camera) stops displaying on the MFD after about 20 minutes "video signal lost" pops up. If I cycle the power to just that camera it comes back. Why is this happening and how do I fix? The CAM220 works perfectly.
RE: CAM200 IP loses picture - Chris - Raymarine - Moderator - 05-28-20 01:13 PM
Hello ocgrant,
I would recommend checking the cables and connections to the CAM200. If the issue persists I would recommend sending the unit into our service department to get evaluated.
Chris,