Short Arm Wind Vane PT# E22078 - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Instruments (/forumdisplay.php?fid=117) +--- Thread: Short Arm Wind Vane PT# E22078 (/showthread.php?tid=1140) |
Short Arm Wind Vane PT# E22078 - rwt1580006 - 06-13-16 05:15 PM I wish to perform a bench test of a short arm wind vane transducer. I understand there are five conductors - Power/Common/Sine/Cosine/Speed and I have read the mast head test thread. I will remove the transducer from the mast head and bring it down for a bench test. The base and cable will stay with the vessel. Is there a reference diagram of the connecter between the arm and the base such that I can correctly connect power/com and make readings on the remaining conductors? I know generally, Raymarine products are based on the Turck Eurofast line of connecters albeit with mechanical modifications. RE: Short Arm Wind Vane PT# E22078 - Chuck - Raymarine - Moderator - 06-15-16 02:49 PM Welcome to the Raymarine Forum rwt1580006, Please click here to view a FAQ addressing this subject. |