DST800 with iTC-5 and e7D no speed - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Instruments (/forumdisplay.php?fid=117) +--- Thread: DST800 with iTC-5 and e7D no speed (/showthread.php?tid=1524) Pages: 1 2 |
DST800 with iTC-5 and e7D no speed - antyukhin - 08-02-16 01:01 PM Hello, I really hope you can help me with my problem. I have Raymarine e7D MFD I add to it DST800 for Depth/Temp/Speed via iTC-5 converter, power is connected to iTC-5 from battery and iTC-5 to e7D via SeaTalk NG Backbone Cable and SeaTalk NG T Piece. You will find diagram in my post. Depth and temp are showing on my e7D, but no speed. Please advice. RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-02-16 01:30 PM Hello antyukhin, What is the software version you are running on the e7D? From the home screen, setup--->maintenance--->diagnostics--->select device If you are not running the latest version of V17.45 I would upgrade first and then try setting the data source. If you are running the latest software, try selecting the data source for speed. From the home screen, system settings--->data sources--->speed--->select "ITC-5" RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-02-16 03:42 PM Hello Mark, I think I have old software version. Last time I update it year ago. Will upgrade it and let you know results. Thank you! RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-03-16 01:43 PM Hello, I did the update to the latest version. Same problem, no speed, but temperature and depth are good. In settings of speed, it did find iTC-5 and it is selected. iTC-5 have a steady green light, no problem found. Please advise. RE: DST800 with iTC-5 and e7D no speed - Mark - Raymarine - Moderator - 08-04-16 02:21 PM Okay, on the iTC-5 if you remove the green wire from the speed temp connection, and then power up the system, what does the speed box display? 3 dashes --- or zero 0.0? When you say your temp is good, is it reading correctly? Is the DST800 your only transducer source for temp? What is model number of the DST800? RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-08-16 05:44 PM After disconecting green cable from speed/temp display shows 0.0kts. Temperature I'm comparing to my neighbor boat data. Dts800 is the only data source in my setup. DST800 A22154 35-002-4-01 18-375-297 rev 01 RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-08-16 07:09 PM I also tried to rus system with no power to itc-5, and then it shows -.- But with power it shows 0.0 RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-09-16 08:22 AM antyukhin, Does the system include an i70s / i70 Multifunction Instrument Display? RE: DST800 with iTC-5 and e7D no speed - antyukhin - 08-09-16 09:08 AM Hello, no, there is no i70 display, do I need to have one? As I understand from description of e7D it supposed to be compatible to show all necessary data via iTC-5. RE: DST800 with iTC-5 and e7D no speed - Chuck - Raymarine - Moderator - 08-09-16 10:18 AM antyukhin, It is indeed necessary for the system to include an i70s / i70 MFID when it includes an iTC-5. Please click here to view a FAQ addressing this subject. |