+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: PC & Mobile (/forumdisplay.php?fid=123)
+--- Thread: Connecting PC to E120 (/showthread.php?tid=1982)
Connecting PC to E120 - Psychfeld1 - 10-22-16 02:51 PM
Hello all,
I am the new owner of an E120 system circa, 2008-9. I am trying to enable my licensed version of RNS 6.1 to work on my PC via ethernet cable connected to port 5 of the SeaTalk HS5 Network Switch.
I get a message that tells me I need to Reconfigure my DHCP Server to assign IP addresses and a subnet mask which I would do if I knew where/how to find those values in my Lenova Think Pad Laptop running Windows 7.
Anybody have any idea about how and/or if this is the right next step?
Thanks kindly!
Rob
RE: Connecting PC to E120 - Chuck - Raymarine - Moderator - 10-24-16 11:25 AM
Ron,
I'm glad that you were successful in locating the license key / serial number. RayTech RNS 6.1 may be used with a PC running the Windows XP, Windows Vista, Windows 7, or Windows 8 operating system. This license key / serial number will allow the PC running the RayTech RNS 6.1 software to be networked Raymarine Ethernet (SeaTalkhs) network. Please click here to view a FAQ addressing how establish network communications between a PC running RayTech RNS 6.1 and an E-Series Classic MFD.