+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: Yamaha to Raymarine Connection (/showthread.php?tid=2209)
Yamaha to Raymarine Connection - ultimatepursuit - 12-06-16 04:05 PM
Hello -
I was recently trying to connect my Yamaha F250 Motors to my Raymarine E125 Displays. I have the new (square) Command Link Plus Yamaha Gauge and I was told I needed a Raymarine E70242 cable. I went to order this cable from a very well known online Marine Electronics Store, and he told me this would NOT work and I needed a Yamaha Cable. They were not an authorized Yamaha Store and sent me to another company. Left a VM with them on trying to find out which cable I needed. Thought I would post here and see if anyone has any thoughts.
Thanks!
RE: Yamaha to Raymarine Connection - Chuck - Raymarine - Moderator - 12-15-16 11:16 AM
Welcome to the Raymarine Forum ultimatepursuit,
It appears that you have been advised incorrectly. Please note that the ECI-100 Engine Gateway is not designed to be interface to the Yamaha gauge. Instead, it is designed to be interfaced to the Yamaha Command-Link or Command-Link Plus Hub to which the Yamaha gauges are interfaced. Accordingly, it is recommended that the Raymarine Yamaha Link Cable (E70242) be purchased to connect the ECI-100 to an unused spur socket within one of your engine system's Yamaha Command-Link or Command-Link Plus Hubs.
RE: Yamaha to Raymarine Connection - ultimatepursuit - 12-21-16 03:59 PM
Chuck - I did not see your reply til now. Thank You. I will get the E70242 ordered and installed. Do I need to setup the E125 any differently? Do I need to purchase the ECI-100?
Thank You
RE: Yamaha to Raymarine Connection - Chuck - Raymarine - Moderator - 12-21-16 04:28 PM
ultimatepursuit,
Should you desire to use the MFD to monitor the engine system and/or desire to use the MFD's Fuel Management features, then an ECI-100 must indeed be installed. You can find more information concerning the ECI-100 and how it would be interfaced to a Yamaha Command Link system here. Upon completing the installation, then the MFD's Identify Engines feature will be used to set up communications with the ECI-100. Detailed information concerning the MFD's Identify Engines feature may be found within the ECI-100's manual.
RE: Yamaha to Raymarine Connection - ultimatepursuit - 01-03-17 04:10 PM
Chuck - Thanks for the reply I ordered both
Raymarine E70227 ECI-100 &
Raymarine E70242 Yamaha Command-Link Plus Cable
Thanks
RE: Yamaha to Raymarine Connection - Chuck - Raymarine - Moderator - 01-03-17 04:36 PM
You're welcome.
RE: Yamaha to Raymarine Connection - msbrett@hotmail.com - 03-04-17 12:46 PM
Ultimatepursuit-
Are you happy with the results? I am thinking about purchasing this same set up as well. I would love to hear your thoughts if it is something you would recommend.
BC
RE: Yamaha to Raymarine Connection - Chuck - Raymarine - Moderator - 03-04-17 09:12 PM
Noted.