Raymarine forum
SmartPilot S2 to StNG network design - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: SmartPilot S2 to StNG network design (/showthread.php?tid=2431)



SmartPilot S2 to StNG network design - Godind - 01-30-17 07:34 PM

Hi,

I would like to know if the following network design will work. I have read everything I could find. Basically I have a new StNG network and want to integrate my S2/ST6002 autopilot so that it can communicates to my a65 as well as sharing heading data to StNG. Note that in my design the SmartPilot does not provide power to the ST6002 who is in turn powered by the St1-StNG converter. See attached drawing below.

[Image: attachment.php?aid=738]


RE: SmartPilot S2 to StNG network design - Chuck - Raymarine - Moderator - 01-31-17 10:40 AM

Welcome to the Raymarine Forum Godind,

Your diagram appears to be correct for interfacing the products shown.


RE: SmartPilot S2 to StNG network design - Godind - 01-31-17 10:19 PM

Thank you Chuck. Much appreciated.


RE: SmartPilot S2 to StNG network design - Chuck - Raymarine - Moderator - 02-01-17 08:47 AM

You're welcome.