Raymarine forum
VOLTAGE READING IN THE E120 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: VOLTAGE READING IN THE E120 (/showthread.php?tid=2634)



VOLTAGE READING IN THE E120 - ynot - 03-03-17 11:00 PM

HELLO
I AM TRYING TO GET IN MY E120 TO READ VOLTAGE
I HAVE DONE THAT BEFORE AND FOR SOME REASON FORGOT HOW TO ACCESS
I GUESS I AM GETTING OLD
MY BEST


RE: VOLTAGE READING IN THE E120 - Chuck - Raymarine - Moderator - 03-06-17 04:49 PM

Welcome to the Raymarine Forum ynot,

Unless interfaced to a NMEA 2000 battery voltage monitor, the MFD would be incapable of populating the Databar or Data application with Battery Voltage. However, a reasonably accurate reporting of battery voltage may be obtained within the MFD's diagnostics (MENU->SYSTEM DIAGNOSTICS->INTERNAL INTERFACES->CCFL->POWER MONITOR).


RE: VOLTAGE READING IN THE E120 - ynot - 03-06-17 11:20 PM

thank you very much Sir