+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: ST50 & ST60 Dimensions/Footprint (/showthread.php?tid=2637)
ST50 & ST60 Dimensions/Footprint - anchorsaweigh - 03-04-17 01:34 PM
I have an opportunity to purchase a NavPod pre-cut to fit four ST60 instruments. I have ST50 instruments in my present NavPod which is a little worse for wear. Will my ST50 set fit in the cutouts for the ST60?
Cheers
Bob
RE: ST50 & ST60 Dimensions/Footprint - Chuck - Raymarine - Moderator - 03-07-17 11:35 AM
Welcome to the Raymarine Forum Bob,
The ST50/ST50+ Instrument and ST60/ST60+ Instruments designed to occupy the same footprint and circular surface mount cut-out.
RE: ST50 & ST60 Dimensions/Footprint - anchorsaweigh - 03-14-17 04:10 PM
Thanks, Chuck! That's excellent news!
I've been digging through these forums and am amazed at the sheer volume of information.
This spring, I'll be installing my A98 in a NavPod and changing the existing one for the instruments. Since I'll have the whole thing apart, I'm going to hook up SeaTalk and install AIS as well.
Again, thanks for the help.
Cheers
Bob