+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: eS78 + Axiom not working (/showthread.php?tid=3090)
eS78 + Axiom not working - alx - 05-14-17 11:30 PM
Hello all!
I recently acquired a 9" Axiom plotter for the cockpit of my sailboat, to complement an eS78 I have at the chart table. They're interfaced via an HS5, along with a Quantum radar.
However, the eS78 has taken a disliking to the Axiom. It seems to alternately acquire and lose the Axiom as a data master, causing it to nearly freeze as it endlessly alerts and quickly recovers: https://goo.gl/photos/XMCMs1zJiJwUin359
I also have a Quantum radar connected to the HS5, which both displays are capable of seeing and using when the other is offline, so I don't think there are network connectivity problems between them.
The Axiom, for its part, correctly identifies the eS78 on the network when prompting for which display to make the Data Master.
I applied all current software updates before making that video - same result.
Any thoughts? Could this be a Lighthouse 2 vs 3 problem?
RE: eS78 + Axiom not working - Chuck - Raymarine - Moderator - 05-15-17 10:45 AM
Welcome to the Raymarine Forum Alx,
Please click here to view a FAQ addressing this subject.
RE: eS78 + Axiom not working - alx - 05-15-17 08:11 PM
Ahh, nice, that confirms my suspicions, thank you!
No worries here! The Axiom chartplotter is unbelievable to use, it's so fast and fluid. Totally worth the wait.
RE: eS78 + Axiom not working - Chuck - Raymarine - Moderator - 05-16-17 08:37 AM
You're welcome. Thanks for the feedback!