+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: Masthead Base Locking Ring Replacement (/showthread.php?tid=3447)
Masthead Base Locking Ring Replacement - jefndeb - 06-29-17 09:49 AM
I have a newer style ST60 MH transducer and the mountbase twist locking ring has cracked and I would like to replace it. I was able to find the replacement part but not 100% sure how to install new one, any suggestions?
RE: Masthead Base Locking Ring Replacement - Chuck - Raymarine - Moderator - 06-29-17 11:36 AM
Welcome to the Raymarine Forum jefndeb,
With the exception of the transducer's cups and vane assemblies, Raymarine's masthead wind transducers are neither designed nor supported for end user repairs. Should the transducer require any service other than than replacement of the the items specified above, the it would be necessary to have the masthead wind transducer serviced a Certified Raymarine Installer (recommend contacting before bringing the transducer to the installer) or by Raymarine’s Product Repair Center.