+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: Trouble with X30 computer (/showthread.php?tid=3565)
Trouble with X30 computer - Pcbeachbroker - 07-16-17 09:34 PM
My St8001 has recently begun giving error codes "current limit" and "mot stall".
I removed the type1 liner drive and tested with seperate power source. Works in both directions. When I power the x30 on I have 13.26 v at power terminals. When I enable auto function I get 13.26v at the clutch terminals but no voltage at the drive motor terminals. With the drive disconnected results are identical but the st8001 still alarms the " current limit" or "mot stall". Any other troubleshooting recommended?
RE: Trouble with X30 computer - Chuck - Raymarine - Moderator - 07-18-17 01:34 PM
Welcome to the Raymarine Forum Pcbeachbroker,
Based upon the symptoms reported, it appears that the X30 autopilot course computer's circuitry has suffered a failure necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.