+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: TackTick T122 NMEA interface not repeating DPT input (/showthread.php?tid=3874)
Pages: 1 2
RE: TackTick T122 NMEA interface not repeating DPT input - allene - 09-01-17 11:03 AM
Thanks. I will just work around it. You may want to document it if you decide not to change it.
RE: TackTick T122 NMEA interface not repeating DPT input - Chuck - Raymarine - Moderator - 09-01-17 12:05 PM
You're welcome.
RE: TackTick T122 NMEA interface not repeating DPT input - allene - 09-22-17 10:37 PM
Just for the record, it will not repeat speed either. In fact, the sentence IIVHW has the heading but speed is blank even though speed it input to the interface.
But I have solved my problem by working around it. I added my depth sentence to a speed interface I built using an Arduino.
RE: TackTick T122 NMEA interface not repeating DPT input - Chuck - Raymarine - Moderator - 09-25-17 11:46 AM
allene,
Thanks for the additional information, it will be added to the corresponding engineering report which had been previously submitted.