+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: E120w and E7d fishfinder using DCM300 (/showthread.php?tid=446)
E120w and E7d fishfinder using DCM300 - brent - 03-25-16 03:38 PM
Chuck,
From reading your last post it appears possible to set up a fish finding system using an E120w and a E7d. Currently I have both these units and a DCM 300, not sure of the transducer. The DCM is connected to the 120wand both units are connected through the back bone.
I do have the fish finder running on the E120w and depth shows up on the E7D although no fish finder.
How would I set the system up to the have fish finding capabilities on both units? you mentioned using a E66066 adapter cable?
thank you for your input!
RE: E120w and E7d fishfinder using DCM300 - Chuck - Raymarine - Moderator - 03-25-16 03:46 PM
Welcome to the Raymarine Forum Brent,
Unfortunately, it is not possible to do as you have suggested. Please click here to view a FAQ addressing this subject.