+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] ITC-5 Setup & Calibration (/showthread.php?tid=4694)
[CA] ITC-5 Setup & Calibration - Wooly - 02-04-18 05:13 PM
System comprising eS75 MFD, STNG bus, STNG convertor, ST60+ tridata and some other devices.
Speed/temperature & depth transducers connected to ST60+
Could the transducers be connected to an ITC-5 and this then calibrated (depth offset, speed, temperature) with the eS75, the ST60+ tridata then functioning as a repeater, or is an instrument needed for ITC-5 calibration?
The tridata memorises total logged distance. Is it possible to calibrate an ITC-5 to match? Indeed is total distance logged stored in the ITC-5?
Thanks
W
RE: [CA] ITC-5 Setup & Calibration - Chuck - Raymarine - Moderator - 02-08-18 05:15 PM
Welcome to the Raymarine Forum Wooly,
Please click here to view a FAQ addressing this subject.