+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] EGT Probe (/showthread.php?tid=4762)
[CA] EGT Probe - MBIII - 02-12-18 01:09 PM
I have a C127 and am looking to Exhaust Gas Temperature Probes to 2 engines (Cummins QSM11). Is there a way to display the data from the probes on the C127 MFD? There are probes that use PNG 13316 (Enhanced by NMEA in 2/2015 for extended range temperatures). Maretron makes some that utilize this PNG. Has anyone gotten them to display on a C127, or know if it can be done? Suggestions? Recommendations?
RE: [CA] EGT Probe - Chuck - Raymarine - Moderator - 02-12-18 02:36 PM
Welcome to the Raymarine Forum MBIII,
Exhaust Gas Temperature is not among the engine data items supported by MFDs running the lastest version of LightHouse II software (i.e. a-Series MFDs, c-Series MFDs, e-Series MFDs, eS-Series MFDs, and gS-Series MFDs). Unfortunately, development of LighHouse II software ended with LighHouse II v19.03 and the a/c/e-Series MFDs do not have the processing power to support use of LightHouse 3 software. At this time, LightHouse 3 software also does not support this engine data item. Accordingly, should it be necessary to display this data item immediately then it would be recommended that a third party solution be sought. A feature suggestion will be submitted to consider addition of this data item to a future LightHouse 3 software update as well as the MFD software which may follow LightHouse 3.
Please click here more information concerning feature suggestions.