+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: [CA] DSM300 to C-125 (/showthread.php?tid=4883)
[CA] DSM300 to C-125 - Diegosub - 03-01-18 02:37 PM
Hi,
I would like to know what cable I'll need to conect DSM300 to a C125 display.
Thanks a lot
Regards,
RE: [CA] DSM300 to C-125 - Chuck - Raymarine - Moderator - 03-02-18 11:44 AM
Diegosub,
The Ethernet (SeaTalkhs) interface of a DSM30 or DSM300 may be interfaced to the Ethernet (RayNet) interface of an a/c/e/eS/gS-Series MFD via a cable assembly which has been constructed from an A80272 RayNet (M) Pins to SThs (M) Socket Adaptor Cable and an appropriate length of RayNet (F) to RayNet (F) Cable.
RE: [CA] DSM300 to C-125 - Diegosub - 04-18-18 08:57 AM
So, will be 2 cables? A80272 and A62361(2m is enough)
RE: [CA] DSM300 to C-125 - Chuck - Raymarine - Moderator - 04-18-18 09:11 AM
Diegosub,
Yes.