Raymarine forum
[CA] Fusion Compatibility - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Fusion Compatibility (/showthread.php?tid=5040)



[CA] Fusion Compatibility - rltrbill - 03-21-18 03:11 PM

Is the new fusion MS-RA70Ni (NEMA2000 compatible) able to be controlled by a ES128?


RE: [CA] Fusion Compatibility - Chuck - Raymarine - Moderator - 03-22-18 09:26 AM

Welcome back to the Raymarine Forum Bill,

LightHouse II v19.03 software is designed to support the Fusion Entertainment products listed within 25.1 Fusion link application
overview of the LightHouse II Release 19 Operating Instructions. While the MS-RA70Ni is not listed among the list of supported Fusion Entertainment product, it is quite possible that the Fusion app within the LightHouse II software may be able to remotely control the MS-RA70Ni. However, as we do not have this Fusion entertainment product within our facilities, it would be recommended that Fusion Entertainment's product support team be contacted to verify compatibility of these product. Fusion Entertainment's product support team is equipped with Raymarine MFD's running both LightHouse II and LightHouse 3 software.


RE: [CA] Fusion Compatibility - rltrbill - 03-22-18 03:30 PM

Thank you- I did call Fusion and they confirmed the compatibility of the MS-RA70N with the ES127/128 and the Fusion app installed in Lighthouse 2. Looks like a go!


RE: [CA] Fusion Compatibility - Chuck - Raymarine - Moderator - 03-22-18 03:48 PM

You're welcome.