+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] i70s System Pack (/showthread.php?tid=5189)
[CA] i70s System Pack - jorbro - 04-13-18 10:10 AM
I have ordered a i70s system pack and 2 supplementary i70s. Unfortunately, I have not received it yet, and my boat goes into the water this weekend for the summer season.
The i70s shall replace an Autohelm ST50 speed, ST50 depth and ST50 Wind.
1. Can I connect the wind vane from the ST50 to the iTC5, otherwise I must wait to set the mast?
2. Can I connect the speed sensor and the depth sensor from the ST50 instruments to the iTC5?
Rg
RE: [CA] i70s System Pack - Chuck - Raymarine - Moderator - 04-13-18 01:15 PM
Welcome to the Raymarine Forum Rg,
Q1. Can I connect the wind vane from the ST50 to the iTC5, otherwise I must wait to set the mast?
A1. Negative. The wind vanes supported by the ST50 instruments are not compatible with the iTC-5. The currently installed wind vane must be replaced with the E22078 (0m cable) | E22079 (50 cable) Wind Vane.
Q2. Can I connect the speed sensor and the depth sensor from the ST50 instruments to the iTC5?
A2. Yes.
RE: [CA] i70s System Pack - jorbro - 04-13-18 02:05 PM
Thanks:-)
RE: [CA] i70s System Pack - Chuck - Raymarine - Moderator - 04-13-18 02:32 PM
You're welcome.