+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] Axiom RMK-10 (/showthread.php?tid=5284)
[CA] Axiom RMK-10 - Larrysr - 04-24-18 11:04 PM
RMK-10 connected to HS5 to Axiom 12. RMK-10 doesn’t turn on or is seen by MFD. On second RMK-10 without using external power and stir not seen. First RMK-10 connected to external power and did not power up. What I’m I doing wrong?
RE: [CA] Axiom RMK-10 - Chuck - Raymarine - Moderator - 04-26-18 03:14 PM
Welcome to the Raymarine Forum Larry,
When used with any product other than a gS-Series MFD, the RMK-9 and RMK-10 Remote Keypads must be powered from a switched 12VDC power circuit. While it sounds as though you may have had a problem with the first RMK-10, the second is clearly missing installation of power. Once properly installed, then RMK-10 must be paired to the MFD. Detailed instructions for doing so may be found within Chapter 4.9 Device pairing of the LightHouse 3.4 Advanced Operation Instructions.