+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: (DG) ST60+ Wind (/showthread.php?tid=5336)
(DG) ST60+ Wind - Svbelle - 05-01-18 01:00 PM
Will my wind vane work with the new i70s for wind gauge.
Current setup is:
Axiom MFD (installed working)
Upgrading the:
Smart pilot
2 of the tridata st60+(inside at nav station, one on the helm in cockpit)
St60+ wind at helm
Going with:
Evolution EV-1, type 2 ram, ACU 400,i70s(to be installed)
ITC-5 converter for transducers (will that convert the wind vane)
3 i70s multi's
1. dedicated for wind(is a sail boat)
2. dedicated as multi use at nav station inside
3. dedicated as multi use at helm
I was told that the ITC will convert the transducers but have not gotten clear confirmation with the wind.
Thanks in advance.
RE: (DG) ST60+ Wind - Derek - Raymarine - Moderator - 05-03-18 05:57 AM
Hi Svbelle
Thank you for your enquiry.
The ST60+ masthead wind transducer can be connected direct to the itc-5 and then the i70s can be used to calibrate it.
This link here gives more details.
regards