+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: C97 MFD Plotting (/showthread.php?tid=543)
C97 MFD Plotting - andrewden - 04-07-16 12:37 AM
I have a question in regards to creating some sort of grid or area on the screen that can be marked by entering in several coordinates. Basically, if you could enter 4 gps points that are in a rectangular area - can the MFD be used to create a line between these points or highlight the area that is within the 4 coordinates. Some of the areas we fish are close to marine protected areas - was hoping I could mark the screen some how that shows when I start drifting close to the boundaries.
Any help would be appreciated.
Andrew
RE: C97 MFD Plotting - Chuck - Raymarine - Moderator - 04-07-16 10:06 AM
Welcome to the Raymarine Forum Andrew,
It is indeed possible to do as you have suggested. Please click here to view a FAQ addressing this subject.