+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] Rv-220 installation (/showthread.php?tid=5446)
[CA] Rv-220 installation - Kccatfish1 - 05-12-18 01:25 PM
Is there a maximum ditance of separation when installing a pair of RV 220? The easiest place to put them so as to not interfere with my boat trailer would be about 6 feet apart. My boat is actually 9 feet wide. If I put them 6 feet apart, will there be a gap in what they can read? I could put them closer together, however I would need to modify my trailer.
RE: [CA] Rv-220 installation - Chuck - Raymarine - Moderator - 05-14-18 03:41 PM
Welcome to the Raymarine Forum Kccatfish1,
RV Thru-Hull Transducer Pair have been designed and tested for a maximum separation of 4'. Should this distance be exceeded, then it may well cause a blind spot directly beneath the keel.