[CA] [CA11] Accessing Wind Vane Mode from Axiom MFD - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128) +--- Thread: [CA] [CA11] Accessing Wind Vane Mode from Axiom MFD (/showthread.php?tid=5629) |
[CA11] Accessing Wind Vane Mode from Axiom MFD - KevinC - 05-31-18 04:26 PM Hello... I cannot seem to figure out how to access Wind Vane mode for the EV-100 Auto Pilot from the Axiom 7 MFD. I am running all current updates. I have tried to find the information in the faqs and manual but have come up empty. Your help would be greatly appreciated! Thanks Kevin RE: [CA11] Accessing Wind Vane Mode from Axiom MFD - Chuck - Raymarine - Moderator - 06-01-18 08:46 AM Welcome to the Raymarine Forum Kevin, Like LightHouse II software, LightHouse 3 software does not support Wind Vane Mode. This mode must be initiated via a p70/p70R/p70S/p70RS Autopilot Control Head. A feature suggestion has been logged to consider the addition of support for Wind Vane Mode within a future LightHouse 3 software update. Please click here more information concerning product and feature suggestions. |