+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Is System Diagram Correct - no power to i 70 and p 70 (/showthread.php?tid=5777)
[CA11] Is System Diagram Correct - no power to i 70 and p 70 - judyfusco - 06-13-18 01:35 PM
We installed an autopilot, an axiom 7 MFD and wind/depth instruments using the attached system diagram. When we powered it up, the computer had power as did the MFD. However, the i 70 and p70 instruments would not turn on. Is there something incorrect in the system diagram or should I double check all connections?
RE: [CA11] Is System Diagram Correct - no power to i 70 and p 70 - Chuck - Raymarine - Moderator - 06-13-18 02:07 PM
Welcome to the Raymarine Forum Judy,
I can find no fault with your diagram. However, it appears that your SeaTalkng backbone is not receiving power. I would recommend starting with the SeaTalkng Power Cable.