+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: Mount for P70R (/showthread.php?tid=582)
Mount for P70R - scoffer - 04-12-16 05:14 PM
Has anyone come across a mount for the P70R? The only thing I have found so far is the very pricey NavPod option. I just want a cradle style mount for my P70R controller. Flush mounting on the dash is not possible due to space constraints. Even though there is enough space in a few spots, it would just be too ungainly to try and reach the unit, as I would have to almost reach around the wheel. I want to put it in a cradle just to the left of the helm so it will be easily reachable. The only option I can come up with is building a small little box to mount it in and then mount that to dash.
I'm attaching a picture of where I intend to place the unit.
Any suggestions would be appreciated.
http://forum.raymarine.com/attachment.php?aid=162
RE: Mount for P70R - Steve - Raymarine - Moderator - 04-13-16 08:28 AM
There is nothing currently available for bracket mount options, but you might want to look online for a bracket mount for the old ST60 instruments that might be able to be fabricated to work with the p70/R control heads.
RE: Mount for P70R - scoffer - 04-13-16 11:57 AM
The only thing I've been able to find so far is a mount for the ST60, which is more of a rectangular shape.
RE: Mount for P70R - Seacom - 04-13-16 01:58 PM
I've mounted one with a RAM mount before, it looked amazing. I don't know the model unfotrunately, but I dare say it was meant for products like this. It had the usual ball ends for the angle adjustment and the part that attached to the P70R was a square with [censored] spaces that perfectly lined up with the mount holes of the P70R and there was a hold cutout in the center that again, looked like it was meant to be there. If I can locate pictures of it, I will follow up later.
RE: Mount for P70R - Steve - Raymarine - Moderator - 04-13-16 04:00 PM
Part number for the older ST60 bracket mount was E25009.
RE: Mount for P70R - vondo - 04-19-16 09:33 AM
(04-13-16 04:00 PM)Steve - Raymarine - Moderator Wrote: Part number for the older ST60 bracket mount was E25009.
I have the same problem. Will the p70 control head fit on the ST60 bracket mount (E25009)? Is it still available for purchase?
Thanks.
RE: Mount for P70R - vondo - 04-19-16 09:48 AM
(04-13-16 01:58 PM)Seacom Wrote: I've mounted one with a RAM mount before, it looked amazing. I don't know the model unfotrunately, but I dare say it was meant for products like this. It had the usual ball ends for the angle adjustment and the part that attached to the P70R was a square with [censored] spaces that perfectly lined up with the mount holes of the P70R and there was a hold cutout in the center that again, looked like it was meant to be there. If I can locate pictures of it, I will follow up later.
I spoke to Ram mount customer service. They could not locate a product that matched. I might have to fabricate something. If you can find more info, it will be very much appreciated.
Thanks.
RE: Mount for P70R - Steve - Raymarine - Moderator - 04-19-16 10:01 AM
The E25009 is no longer available, it's discontinued, but I searched online and found a couple available there.