+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] Autotack user cal on ST6002 SmartPilot Controller (/showthread.php?tid=6167)
[TG11] Autotack user cal on ST6002 SmartPilot Controller - tyed - 07-21-18 03:00 PM
Good Morning or Afternoon,
I am having trouble setting up my Autotack angle on my ST6002 SmartPilot Controller. I would like to specify a specific angle, rather than use the
Relative Tack option. Currently, I appear stuck on rEL (Relative Tack) and cannot get the display to change. I have tried both the user cal and dealer cal pages.
My system info: ST6002 Smartpilot. Version 5.0. X30 I20. 01696 hours. Two stickers on the unit: 1) E12098-P 1190171 and 2) 5624-010 41266140
Thanks in advance for you help!
David Tye
RE: [TG11] Autotack user cal on ST6002 SmartPilot Controller - Tom - Raymarine - Moderator - 07-25-18 10:28 PM
Hello David,
Sorry for the delay replying.
This, I'm sorry to say, an SPX pilot limitation: the SPX pilots didn't support a manual/fixed tack angle. There was an error in the handbook that said that they did (I have a feeling that that was corrected in a later issue of the handbook, but haven't checked back.)
Regards,
Tom
RE: [TG11[ Autotack user cal on ST6002 SmartPilot Controller - tyed - 07-27-18 09:35 AM
Thanks Tom, appreciate the response and information...
David
RE: [TG11] Autotack user cal on ST6002 SmartPilot Controller - Tom - Raymarine - Moderator - 07-29-18 09:02 PM
No problem.
Tom