Raymarine forum
[CA] [CA11] E125 MFD vessel position not advancing - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] E125 MFD vessel position not advancing (/showthread.php?tid=6294)



[CA11] E125 MFD vessel position not advancing - Delfina - 08-03-18 06:01 AM

I have a E125 E70023 MFD. The MFD will intermittently stop advancing the vessel position on the display. The Lat/Long position advances correctly and all other features are working and there is no alarm. The vessel on the display will even rotate if I change course but the position is incorrect. I am attaching an image showing the the vessel in the wrong position on the MDF the Lat/Long is correct and also showing an alternate plotter showing the correct vessel position for comparison.

CS


RE: [CA11] E125 MFD vessel position not advancing - Chuck - Raymarine - Moderator - 08-03-18 10:23 AM

Welcome to the Raymarine Forum Delfina,

Please generate and attach a Diagnostics...html file for this system and attach it to your reply. Please additionally indicate whether the MFD's installation location affords it an unobstructed view of the skies overhead.